Briko
  • LT
  • EN
  • RU
  • EE
  • LV
  • Title page
  • About Briko
  • Products
  • Advices
  • Events
  • Where to buy
  • Contacts
  • Title page
  • About Briko
  • Products
  • Advices
  • Events
  • Where to buy
  • Contacts
  • DRY MORTAR MIX

    DRY MORTAR MIX

    Used for building all types of brick and block walls. Used for both external and internal works.

    Learn more
  • DRY PLASTER MIX

    DRY PLASTER MIX

    Used for both external and internal works.

    Learn more
  • UNIVERSAL GYPSUM PUTTY (UGL-10)

    UNIVERSAL GYPSUM PUTTY (UGL-10)

    Gypsum putty is a multi use product. Designed for coating mineral substrates, filling cracks and defects, laying cables, grouting, etc. Also suitable for attaching gypsum elements to mineral substrates and filling plasterboard joints covered with reinforcing strip. Not suitable for metal, glass and plastic as well as damp and deformed foundations. Do not use lime or chalk paint. Designed to be used indoors. The product complies with EN 13963 standard.

    Learn more
  • ELASTIC GYPSUM PUTTY (EGL-5)

    ELASTIC GYPSUM PUTTY (EGL-5)

    Used to seal and cover profiled plasterboard joints with or without reinforcing tapes. Also suitable for filling gaps gaps and coating mineral bases. Designed to be used indoors. The product complies with EN 13963 standard.

    Learn more
  • GLASS CLOTH TAPE

    GLASS CLOTH TAPE

    Glass cloth tape provides very durable and reliable reinforcement for plaster and plasterboard joints. The tape is also suitable for sealing small holes and fractures.

    Learn more
  • PLASTERBOARD ADHESIVE (GKL-15)

    PLASTERBOARD ADHESIVE (GKL-15)

    The product can be used to attach plasterboards to the walls as well as with plasterboard strips forming a structure under the main wall panels. Also, the product can be used to attach other gypsum elements and rigid insulation panels to the walls indoors. When erecting partitions, the product can be used to fasten together gypsum blocks. The product complies with EN 14496 standard.

    Learn more
  • GYPSUM-BASED HAND APPLIED PLASTER (GTR-8)

    GYPSUM-BASED HAND APPLIED PLASTER (GTR-8)

    Gypsum-based plaster designed for manual one layer application on interior walls and ceilings (partitions) of residential and public buildings, where relative humidity does not exceed 70%. The product can be applied to properly prepared walls, ceilings (partitions) and so on, made of bricks, sand-lime bricks, hollow ceramic blocks, standard and pervious concrete blocks. The product complies with the EN 13279-1 standard.

    Learn more
  • GYPSUM-BASED MACHINE APPLIED PLASTER (MT-8)

    GYPSUM-BASED MACHINE APPLIED PLASTER (MT-8)

    Gypsum-based plaster designed for single layer machine application on interior walls and ceilings (partitions) of residential and public buildings, where relative humidity does not exceed 70%. The product can be applied to properly prepared walls, ceilings (partitions) and so on, made of bricks, sand-lime bricks, hollow ceramic blocks, standard and pervious concrete blocks. The product complies with the EN 13279-1 standard.

    Learn more
  • FINE-GRAINED DRY CONCRETE (SB)

    FINE-GRAINED DRY CONCRETE (SB)

    Dry cement mix used to lay concrete floors, fill gaps between reinforced concrete elements, lay concrete heat-insulated floors, and concrete small structures.

    Learn more
  • Thin-layer dry mortar for various elements of brick masonry BRIKO B-F

    Thin-layer dry mortar for various elements of brick masonry BRIKO B-F

    Mortar is designed for laying of porous concrete, expanded-clay concrete, silicate, ceramic and other type of wall articles with thin brickwork joints (3 – 5 mm) inside and outside the buildings.

    Learn more
  • THIN-LAYER DRY MORTAR FOR VARIOUS ELEMENTS OF BRICK MASONRY (B-F)

    THIN-LAYER DRY MORTAR FOR VARIOUS ELEMENTS OF BRICK MASONRY (B-F)

    Mortar is designed for laying of porous concrete, expanded-clay concrete, silicate, ceramic and other type of wall articles with thin brickwork joints (3 – 5 mm) inside and outside the buildings.

    Learn more
  • MORTAR PLASTICISER BP

    MORTAR PLASTICISER BP

    The product was designed for plasticization of all types of mortars. Particularly suitable for stonework and plasterwork mortars. Replaces lime batter used for plasticization. Concrete plasticizer. Improves structure and durability of concrete and mortar. Air entraining plasticizer. Increases air micropore concentration in mortars and reduces the amount of water required thus increasing concrete resistance during freezing and warming cycles. Helps to prevent white salt stains.

    Learn more
  • CONCRETE PLASTICISER FOR HEAT-INSULATED FLOOR (FLOORPLAST)

    CONCRETE PLASTICISER FOR HEAT-INSULATED FLOOR (FLOORPLAST)

    Reduction of the amount of water helps to reduce the possibility of concrete cracking while hardening. Increases resistance to frost; concrete may be laid at ambient temperature of up to -17C. Speeds up curing of concrete and mortar at negative temperatures. May be used in negative temperatures. May be used for reinforced concrete products; Does not cause electrochemical corrosion of metal reinforcement.

    Learn more
  • MORTAR PLASTICISER (PLASTMIX)

    MORTAR PLASTICISER (PLASTMIX)

    Air entraining plasticizer. Increases air micropore concentration in mortars and reduces the amount of water required thus increasing concrete resistance during freezing and warming cycles. Helps to prevent white salt stains.

    Learn more
  • Tiling system
  • Self-leveling underlayments
  • Insulation systems
  • Masonry, stucco, concrete
  • Adhesives
  • Mounting foam
  • Sealants
  • Underlayments, films
  • Primers
  • Putty
  • Title page
  • About Briko
  • Products
  • Advices
  • Events
  • Where to buy
  • Contacts

© 2023 BRIKO. All rights reserved.