White pine, spruce, birch, oak, dark oak, ash, beech, alder, dark wood, walnut.
Does not contain solvents. The coated surface can be painted or varnished.
BASE / SURFACE PREPARATION
The surface to be covered must be solid, dry and clean. Before starting the work, remove loose particles, dust and grease from the surface.
The putty is ready to use. Use a spatula to stir the product before use.
CONSUMPTION AND OUTPUT
Depends on surface irregularities.
Store in a tightly closed container at a temperature of + 5 °C or above. Protect from frost.
SHELF LIFE Best for 18 months after the date of production.
ATTENTION! WORK SAFETY
Use personal protective equipment for skin and eyes. After contact with eyes, wash immediately with plenty of water and seek medical advice. Keep out of reach of children. Do not pour down the drain, into water bodies, or on the ground.
Recommended working temperature above +5 °C. Moisture content of wood to be coated must not exceed 10 %. The putty layer applied should not be thicker than 3 mm. To smooth bigger or deeper irregularities apply the putty in several layers, allowing each to dry. At a temperature of + 20 °C and relative humidity of 60%, you can touch the coated surface after 1.5 hours; scrubbing, painting or varnishing of the coated surface possible 4 hours. In cooler and damper conditions, the drying time will increase. After having completed the work, wash used tools with water.