PROPERTIES
Remains elastic under various weather conditions, has good bonding with glass, ceramic tiles, enamel, porcelain, painted surfaces, and variety of construction materials.
BASE / SURFACE PREPARATION
Surfaces should be clean, dry and free of dust, grease, oils and other contaminants.
CONSUMPTION AND OUTPUT
Depending on the width of the seam. Given seam measurements 4 x 6 mm, output 12,9 m.
STORAGE CONDITIONS
Store at a temperature between + 5 °C and + 25 °C.
SHELF LIFE
When stored in the original package – 24 months after the date of production.
ATTENTION! WORK SAFETY
When solidifying, a certain amount of acid may evaporate from silicone. Avoid prolonged or repeated contact with skin. In case of contact with eyes, wash immediately with plenty of water and seek medical advice. Keep out of reach of children.
Remove cap, cut off the injection tip, put the cap back on, and trim it at a certain angle to a diameter that matches the width of the joint. The sealant is applied manually or using pneumatic gun at a temperature between + 5 °C and + 40 °C. Within 5-10 minutes after application, the sealant must be levelled with the help of spatula. Soap solutions acts as an excellent aid. Minimum joint width – 4 mm, maximum joint width – 30 mm, maximum joint depth – 10 mm. Do not apply paint. Resistance to heat: from -50 °C to +120 °C. Immediately after use, wash the tools with turpentine or alcohol; wash hands using special detergents or soapy water.
