PROPERTIES
When unprimed, bonds well with majority of construction materials, including those with damp surfaces. Cold-resistant. Easy to apply, can be painted over with alkyd and water-dispersible paints. Sensitive to water within 5 hours after application. Does not cause rusting.
BASE / SURFACE PREPARATION
Surfaces should be clean, dry and free of dust, grease, oils and other contaminants.
CONSUMPTION AND OUTPUT
Depending on the width of the seam. Given seam measurements 4 x 6 mm, output 12,9 m.
STORAGE CONDITIONS
Store at a temperature between + 5 °C and + 25 °C.
SHELF LIFE
When stored in the original package – 24 months after the date of production.
ATTENTION! WORK SAFETY Avoid prolonged or repeated contact with skin. In case of contact with eyes, wash immediately with plenty of water and seek medical advice. Keep out of reach of children.
Remove cap, cut off the injection tip, put the cap back on, and trim it at a certain angle to a diameter that matches the width of the joint. The sealant is applied manually or using pneumatic gun at a temperature between + 5 °C and + 40 °C. Within 5-10 minutes after application, the sealant must be levelled with the help of spatula. Soap solutions acts as an excellent aid. If the sealant is applied outdoors, the coated surface must not be subjected to rain during the first 5 hours after the sealant application, or constant precipitation thereafter.
After having completed the work, wash used tool with water. Dry foam should be removed using tools and agents specifically designed for that purpose.
