Good bonding with various surfaces. Primed surfaces have good vapour permeability. In addition, such surfaces are resistant to moisture and alkali.
BASE / SURFACE PREPARATION
The surfaces need to be dry and clean. Before priming, the surface must be cleaned from dust, dirt, grease spots and other contaminants.
MIXTURE PREPARATION
The primer is ready to use.
CONSUMPTION AND OUTPUT
0.1–0.2 l/m².
STORAGE CONDITIONS
Store in a tightly closed container at a temperature of at least + 4 °C. Prevent from freezing!
SHELF LIFE Best for 12 months after the date of production.
ATTENTION! WORK SAFETY
Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water and soap.
Use brush or roller to thoroughly rub the product into the surface, or spray the product using a low-pressure pulverizer. Make sure to evenly distribute the product over the entire surface. We recommend to prime weak, very porous or very moisture absorbent surfaces several times. Drying time: 1.5 hours at the temperature of +20 °C. The second layer can only be applied after making sure that the first layer has dried. To ensure high quality, we recommend that the second priming be carried out no sooner than after 8 hours after the first priming. Do not use the primer when the ambient and wallpaper temperature is below +6 °C. Contaminated tools and containers may be cleaned using warm water and detergent.
