Good bonding with various surfaces. Primed surfaces have good vapour permeability. In addition, such surfaces are resistant to moisture and alkali.
BASE / SURFACE PREPARATION
The surfaces need to be dry and clean. Before priming, the surface must be cleaned from dust, dirt, grease spots and other contaminants.
MIXTURE PREPARATION
Prepare the primer by diluting the concentrate with water in the specified ratios: 1:5 before daubing, plastering or painting; 1:4 before fitting tiles and wallpaper; 1:3 before the use of self-levelling mixtures. Use only clean water.
Use brush or roller to thoroughly rub the product into the surface, or spray the product using a low-pressure pulverizer. Make sure to evenly distribute the product over the entire surface. We recommend to prime weak, very porous or very moisture absorbent surfaces several times. Drying time: 1.5 hours at the temperature of +20 °C. The second layer can only be applied after making sure that the first layer has dried. To ensure high quality, we recommend that the second priming be carried out no sooner than after 8 hours after the first priming. Do not use the primer when the ambient and wallpaper temperature is below +6 °C. Contaminated tools and containers may be cleaned using warm water and detergent.
