PROPERTIES
Improves plaster adhesion to the substrate, facilitates plasterwork, provides the desired base colour and unifies absorption, but does not reduce vapour permeability. Resistant to cold and moisture. You can use disperse pigments for colouring.
BASE / SURFACE PREPARATION
The surface to be covered must be solid, dry and clean. Use suitable cleaning agents to remove all dirt such as grease, oils, moulds, and moss from the surface. Use base primer for surfaces with high moisture absorption capacities.
CONSUMPTION AND OUTPUT
0.2-0.25 kg/m² (depending on moisture-absorbing properties of the base).
STORAGE CONDITIONS
Keep tightly closed container in a cool place protected from cold.
SHELF LIFE Best for 12 months after the date of production.
ATTENTION! WORK SAFETY
The work must be carried out in a dry environment. When working as well as at the time of drying air and base temperature must be between + 5 °C and + 25 °C. All data and recommendations provided are valid at a temperature of + 20 °C and relative humidity of 60%. At other conditions primer properties may change.
Provided work recommendations are observed, the producer ensures the quality of the mixture. However, the producer will not be responsible for any consequences that may result from use of the mixture in other circumstances, or for other purposes.
Stir well before use.
Use brush, roller or paintbrush. Operating temperature should be between + 5 °C and + 25 °C. After the product has fully cured, i.e. after about 24 hours, the surface can be painted or covered with structural stucco. Cover with protective material the surfaces you don't want to coat (such as windows, window sills, etc.), or clean the material before it dries.
