PROPERTIES
When cured, adhesive film becomes transparent and elastic. The glue does not contain organic solvents or dibutyl phthalate.
BASE / SURFACE PREPARATION
The surfaces need to be dry and clean. Before applying the adhesive the surface must be cleaned from dust, dirt, grease spots and other contaminants. If a wooden surface is very tarred, before gluing the resin should be removed, using solvent.
MIXTURE PREPARATION
The adhesive is ready to use.
CONSUMPTION AND OUTPUT
0.15–0.2 kg/m².
PACKAGE
1 kg, 3 kg.
STORAGE CONDITIONS
Store in a tightly closed container at a temperature of at least + 4 °C. Prevent from freezing!
SHELF LIFE Best for 12 months after the date of production.
ATTENTION! WORK SAFETY
Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water and soap.
The glue can be applied manually using various rollers, or sprayed (with restrictions). To ensure a stronger bond, we recommend applying a layer of glue to each side. Compression duration depends on operating conditions. Compression duration prolongs in case of hard/ tarred wood, very low operating temperature, and wood moisture greater than 15 %. Recommended working conditions: room and product temperature +18 – +20 °C; relative air humidity 50 – -70 %; open time (180 g/cm²) 5 – -15 min.; compression force (wood to wood) 0.1-0.5 N/mm²; compression duration 25 – -40 min. Do not use the adhesive when the ambient and wallpaper temperature is below +10 °C. Contaminated tools and containers may be cleaned using warm water and detergent.
