PROPERTIES
Stable one-component polyurethane foam used for installation and insulation.
BASE / SURFACE PREPARATION
The surface should be clean, i.e. free of grease and other impurities.
CONSUMPTION AND OUTPUT
Approximately 45 litres (depending on humidity and air temperature).
STORAGE CONDITIONS
Store upright in a dry, cool place.
SHELF LIFE Best for 18 months after the date of production. Store tightly closed at a temperature between + 5 °C and + 25 °C.
ATTENTION! WORK SAFETY
Do not heat using artificial heat sources. Protect working area by covering it with paper or film. Ensure that there is proper ventilation during and after work. Working temperature: between + 5 °C and + 25 °C. Optimum canister temperature: + 20 °C.
Shake canister well (about 30 times) before use. Attach nozzle to the canister's valve and turn the canister valve down. Fill joints about 50%. Joints wider than 4 cm and deeper than 5 cm should be filled in several layers. Before applying another layer, wait 15-30 minutes, then dampen the surface with water. Vertical joints should be filled from the bottom upwards. In about 45 minutes, cut away excess foam. After foam has fully hardened, it can be plastered, painted or drilled. Non-hardened foam can be removed using tools and agents specifically designed for that purpose. Hardened foam can only be removed mechanically.
Used to fill and seal cavities, window sills, door and window frames made of wood, metal or PVC. Used to fill the cracks and gaps in structural partitions. Used to assemble and seal prefabricated structural timber frame. Used to fill cavities and grooves in walls, partition and roofs.
Learn more
Used to mount window and door jambs, boards, window sills, thresholds, blinds, shutters, and gates. Used to fill holes in walls and ceilings, through which pipes, cables or chutes were installed. Used to insulate water, ventilation and heating systems. Used to seal roofing junctions and gaps.
Learn more