PROPERTIES
The product has a very good adhesion to gypsum, brick and hollow ceramic and silicate blocks, standard and pervious concrete substrates indoors. Easy to use. Hardens quickly after thickening.
BASE / SURFACE PREPARATION
The substrate should be properly prepared, i.e. smooth and uniform texture, all dust, grease, lubricants, and other technical fluids removed from the surface. In order to prevent growth of microorganisms, apply an antimycotic agent, then clean the base mechanically. Use bottom primers for highly or unevenly absorbent and dusty surfaces. Use bond enhancing primers for absorbent concrete bases.
MIXTURE PREPARATION
Pour the dry mix into clean cold water in portions. Mix manually or mechanically (e.g., using low speed mixer). Do not mix more adhesive than you can use within 30 minutes.
CONSUMPTION AND OUTPUT
5 kg/m²
STORAGE CONDITIONS
Store in a dry place, protect from moisture, do not damage the original packaging.
SHELF LIFE
Best for 6 months from the date of production.
ATTENTION! WORK SAFETY
The work must be carried out in a dry environment. When working as well as at the time of drying air and base temperature must be between + 5 °C and + 25 °C. All data and recommendations provided are valid when the air and substrate temperature is equal to + 20 °C and relative humidity 60%. Under other conditions, the properties of the product may change.
Provided work recommendations are observed, the producer ensures the quality of the mixture. However, the producer will not be responsible for any consequences that may result from use of the mixture in other conditions, or for other purposes.
To attach plasterboards, apply adhesive in dots arranged approximately 0.4 m from each other horizontally and vertically. If a plasterboard is to be covered with a solid covering (e.g., ceramic tiles), the distance between the points should be approximately 0.25 m. Panels with the thickness of 9.5 mm should be applied the adhesive in stripes. Do not mix adhesive with other materials. The work must be carried out in accordance with the plasterboard manufacturer's instructions.
