Back

GLASS CLOTH TAPE

Information

PROPERTIES
Adhesive.
Tension resistant.
Width: 48 mm
Density: 65 g/m².

ROLL LENGTHS AVAILABLE
20 m.
45 m.
90 m.
180 m.
BASE / SURFACE PREPARATION
The base must be clean, firm, solid, free from dust, lime, fat, and old paint residue.

ATTENTION! WORK SAFETY
Before filling joints between plasterboards, check whether the plasterboards are properly attached to the base or metal structures in accordance with the installation rules and regulations.

INSTRUCTIONS FOR USE

Glass cloth tape is to be attached at panel joint areas. After joining panels with the tape, cover the tape with a thin layer of putty and allow to dry. Then, spread a wider layer of putty until the tape is covered completely. The finishing layer should be applied as widely as possible in order to hide irregularities. After the finishing layer has dried, use sandpaper or abrasive mesh to grind joints. Before painting, remove dust from the grinded surface. To check the quality of your work, direct the light along the wall. This will help you notice irregularities and poorly grinded areas.