Back

SILICONE-BASED WALL COATING WITH RUGGED STRUCTURE (SDT-L)

Information

PROPERTIES
Ready to use, solvent-free, pigmented, waterproof, water and environment resistant (biological contamination and UV rays), paste-like structural wall coating (with rugged structure) that has optimal water vapour permeability, and high elasticity.

BASE / SURFACE PREPARATION
The surface to be covered must be solid, dry and clean. Use suitable cleaning agents to remove all dirt such as grease, oils, moulds, and moss from the surface. Cover with protective material the surfaces you don't want to coat (such as windows, window sills, etc.), or clean the material before it dries. Approximately 24 hours before application prime the surfaces with universal primer BRIKO UTG. Use base primer for surfaces with high moisture absorption capacities. Use only stainless tools for application of the coating. Operating temperature should be between + 5 °C and + 25 °C.

CONSUMPTION AND OUTPUT
Depending on smoothness and absorption capacity of the substrate and thickness of the coating different amounts of materials are used:
Rugged structure 1,5 mm - approx. 1.7 kg/m²
Rugged structure 2 mm - approx. 2.4 kg/m²
Rugged structure 3 mm - approx. 3.7 kg/m²

STORAGE CONDITIONS
Keep tightly closed container in a cool place protected from frost.

SHELF LIFE Best for 12 months after the date of production.

ATTENTION! WORK SAFETY
The work must be carried out in a dry environment. When working as well as at the time of drying air and base temperature must be between + 5 °C and + 25 °C. All data and recommendations provided are valid when air and substrate temperature is + 20 °C and relative humidity 60%. Under other conditions, the properties of the product may change.
Provided work recommendations are observed, the producer ensures the quality of the mixture. However, the producer will not be responsible for any consequences that may result from use of the mixture in other conditions, or for other purposes.

INSTRUCTIONS FOR USE

Stir well before use.
Use a spatula to apply a layer of the coating with the thickness equal to that of the largest grain. Use plastic spatula to rub the stucco with rugged structure in using straight or circular motions, depending on the surface structure you wish to obtain. When working, protect from direct sunlight, strong wind, etc. Areas covered should be joined before the coating dries. Differences in the base absorption capacity may result in differences in the colour of the coating. After having completed the work, wash used tools with water.


THE PRODUCT MAY BE USED IN COMBINATION WITH:

UNIVERSAL WALLCOVERING PRIMER (UTG)
UNIVERSAL WALLCOVERING PRIMER (UTG)

Acrylic dispersion-based priming agent used to prepare the substrate for the application of mineral, acrylic or mosaic plaster. Used indoors and outdoors.

Learn more
UNIVERSAL ADHESIVE AND REINFORCING MIXTURE (KL-VIP)
UNIVERSAL ADHESIVE AND REINFORCING MIXTURE (KL-VIP)

Mixture used to attach and reinforce thermal insulation, styrofoam and mineral wool panels. Made using mineral binders, mineral fillers and modifiers.

Learn more