ACRYLIC STUCCO WITH PEBBLE STRUCTURE (ADT-S)

Information

PROPERTIES
Ready to use, solvent-free, colorable, paste-like structural stucco (with rugged structure). Very good adhesion to the surface, waterproof, resistant to cold and moisture, elastic.

BASE / SURFACE PREPARATION
The surface to be covered must be solid, dry and clean. Use suitable cleaning agents to remove all dirt such as grease, oils, moulds, and moss from the surface. Cover with protective material the surfaces you don't want to coat (such as windows, window sills, etc.), or clean the material before it dries. Approximately 24 hours before application prime the surfaces with universal primer BRIKO UTG. Use base primer for surfaces with high moisture absorption capacities. Use only stainless tools for application of the coating. Operating temperature should be between + 5 °C and + 25 °C.

CONSUMPTION AND OUTPUT
Depending on smoothness and absorption capacity of the substrate and thickness of the coating different amounts of materials are used:
Grained structure 1,5 mm - approx. 2.4 kg/m²
Grained structure 2 mm - approx. 3.4 kg/m²
Grained structure 3 mm - approx. 5 kg/m²

STORAGE CONDITIONS
Keep tightly closed container in a cool place protected from frost.

SHELF LIFE Best for 12 months after the date of production.

ATTENTION! WORK SAFETY
The work must be carried out in a dry environment. When working as well as at the time of drying air and base temperature must be between + 5 °C and + 25 °C. All data and recommendations provided are valid at a temperature of + 20 °C and relative humidity of 60%. Under other conditions, the properties of the product may change.
Provided work recommendations are observed, the producer ensures the quality of the mixture. However, the producer will not be responsible for any consequences that may result from use of the mixture in other circumstances, or for other purposes.

INSTRUCTIONS FOR USE

Stir well before use.
Use a spatula to apply a layer of the coating with the thickness equal to that of the largest grain. Rub the pebble-structured coating immediately with a plastic spatula in circular motions. When working, protect from direct sunlight, strong wind, etc. Areas covered should be joined before the coating dries. Differences in the base absorption capacity may result in differences in the color of the coating. After having completed the work, wash used tools with water.

Paint calculator