Excellent bonding and strength. Does not contain organic solvents.
BASE / SURFACE PREPARATION
The surfaces need to be dry and clean. Before applying the adhesive the surface must be cleaned from paint, dust, dirt, old wallpaper, grease spots and other contaminants. Before applying the adhesive, we recommend using BRIKO bottom primer that will improve the adhesive's bonding with the base as well as unify the base. If the surface is very weak and/or porous, it should be primed. The base can be primed using wallpaper adhesive diluted with water one-to-one.
The adhesives are ready to use. Mix well before use.
CONSUMPTION AND OUTPUT
1 kg, 3 kg, 5 kg, 10 kg
Store in a tightly closed container at a temperature of at least + 4 °C.. Prevent from freezing!
SHELF LIFE Best for 12 months after the date of production.
ATTENTION! WORK SAFETY
Keep out of reach of children. After contact with eyes, wash immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water and soap.
The adhesive is applied manually to the reverse side of the wallpaper, using various brushes and rollers. Allow the adhesive to soak in following the manufacturer's recommendations or press them immediately to the surface (walls or ceiling). To ensure strong bonding, apply a layer of adhesive to each side. Open holding time should not exceed 30 minutes, therefore, within this time you should apply the adhesive and press the wallpaper against the base (wall or ceiling). Next, immediately remove excess adhesive with a clean, damp cloth. Recommended working temperature – between + 18 °C and + 20 °C. Do not apply the adhesive when the ambient and wallpaper temperature is below +10 °C. Contaminated tools and containers may be cleaned using warm water and detergent.