PROPERTIES
The adhesive is strong, water resistant, and has good adhesion properties.
BASE / SURFACE PREPARATION
The surfaces need to be dry and clean. Before applying the adhesive the surface must be cleaned from dust, dirt, grease spots and other contaminants. Priming recommended before bonding. Do not apply the adhesive when ambient temperature below +4°C.
CONSUMPTION AND OUTPUT
Consumption: 4–5 m²/kg.
STORAGE CONDITIONS
Store the primer in a tightly closed contained in the temperature above +4°C. Protect from freezing!
SHELF LIFE
Best for 12 months from the date of production.
ATTENTION! WORK SAFETY
Keep out of reach of children. After contact with eyes, wash immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water and soap.
The adhesive can be applied manually (using different types of brushes and spatulas). To achieve even stronger bonding, apply on both surfaces. Compression duration depends on operating conditions. Environmental parameters (temperature and humidity) affect the adhesive curing time. At higher temperatures and lower humidity, the adhesive dries more quickly. First, use plane spatula to apply the adhesive, then use notched spatula to evenly distribute it over the surface. Open holding time should not exceed 15 minutes; therefore, within this time you should apply the adhesive and press decorative tiles or panels against the surface.
